Kilns

1 square solid kiln shelf, 1 small fibre shelf, bung & four 1/2" props

SC-2 Features
On/off safety switch
Built-in base; no extra stand needed
Door opens 180 degrees
The case is slotted for air circulation
Electrical components in the base stay cool even at extended hold times
The embedded element heats from the two sides and back
Top vent complete with tapered plug for lost wax casting
Includes a 1/4” thick ceramic fiber shelf
The Sentry Xpress 3-key controller is packed with features. It includes two modes: Single Segment and 8-segment Ramp-Hold.

Features of the Sentry Xpress 3-key Controller on the SC-2

Design programs with up to 8 segments (steps) in Ramp-Hold mode. Fire to a single temperature at a single speed in the simplified Single Segment mode. Ramp-Hold mode can store 4 programmes. Skip Segment feature in Ramp-Hold mode Temperature hold The Sentry Xpress can control both heating and cooling. Program Review lets you check that the program you are about to fire is correct. Temperature Display throughout firing and cooling in your choice of °F or °C Error Messages report mechanical problems such as a disconnected thermocouple, stuck relay or broken element. 12 Month Warranty LED Lights show whether you are in program, review, or firing mode. Specially designed cartons and foam padding assure that the kiln should arrive safely.

The digital SC-2 kiln fires silver art clay, decals or transfers, china paint, enameling, and glass in minutes up to 1050°C The SC-2 is popular with seminar teachers and hobbyists because it fires fast, plugs into a standard 240 volt household socket, (and is easy for teachers to sell.)
The basic SC-2 has been in production since 1997. It is a proven design that Paragon Kilns have steadily refined every year. Thousands of artists in the U.S., Canada, Europe, and Japan love their SC-2. The SC-2, for a digital kiln, just 3 buttons giving you amazing control over a wide range of firing times and temperatures. yet is surprisingly affordable. It fires automatically at the rate and temperature you enter. A large, brightly lit display prompts for firing rate, temperature and hold time. Use the hold feature to automatically soak any type of clay silver to its recommended time.
The high-tech ceramic fibre firing chamber is wrapped in a steel inner case. The outer steel case remains cool due to the layer of air between it and the inner case. In addition, the case is slotted for air circulation. Electrical components, located in the base, stay cool even at extended hold times.
The fast-firing element is embedded in the firing chamber shell. The SC-2 heats from the sides and back. Each SC-2 includes a 1/4” thick ceramic fiber shelf.

Why is a ceramics company selling a glass/ silver kiln?
Hobby Ceramicraft are the original Paragon kiln stockists in the U.K. having sold large numbers of ceramic kilns here over the years. We also host the Paragon kiln service and maintainance seminars in the U.K. of a fairly regular basis. We ship our kilns in quantity, not by small expensive air freight consignments as many others do, but by sea in 20 and 40 foot shipping containers. This means we can add a few small glass or silver clay kilns into the container at a very much lower freight cost per kiln. When you come to comparing our price at the bottom with those quoted by other smaller companies you will notice the very considerable difference. (Note also; we always include a furniture kit in our price. We think it silly to make it an extra; you would not buy a cooker then pay extra for some shelves would you!)