Kilns

1 square solid kiln shelf, 1 small fibre shelf, bung & four 1/2" props

SC-2 Features
On/off safety switch
Built-in base; no extra stand needed
Door opens 180 degrees
The case is slotted for air circulation
Electrical components in the base stay cool even at extended hold times
The embedded element heats from the two sides and back
Top vent complete with tapered plug for lost wax casting
Includes a 1/4” thick ceramic fiber shelf
The Sentry Xpress 3-key controller is packed with features. It includes two modes: Single Segment and 8-segment Ramp-Hold.

Features of the Sentry Xpress 3-key Controller on the SC-2

Design programs with up to 8 segments (steps) in Ramp-Hold mode. Fire to a single temperature at a single speed in the simplified Single Segment mode. Ramp-Hold mode can store 4 programmes. Skip Segment feature in Ramp-Hold mode Temperature hold The Sentry Xpress can control both heating and cooling. Program Review lets you check that the program you are about to fire is correct. Temperature Display throughout firing and cooling in your choice of °F or °C Error Messages report mechanical problems such as a disconnected thermocouple, stuck relay or broken element. 12 Month Warranty LED Lights show whether you are in program, review, or firing mode. Large viewing window to keep an eye on conditions within.

The digital SC-2 kiln fires silver art clay, decals or transfers, china paint, enameling, and glass in minutes up to 1050°C The SC-2 is popular with seminar teachers and hobbyists because it fires fast, plugs into a standard 240 volt household socket, (and is easy for teachers to sell.) Available to order.