Terra Bella Glazes from Hobby Colorobbia

Boxes

Button box

MB1410
£34.37 per box of 6Stock Available:  box of 6 = 7
Origin: CHINA

Button shaped box measure 4cm tall x 16cm wide.

 

Plaid Button Box

 

 

Products Used:

 

Bisque

  • MB-1410 Button Up Box
Colour

Decorating Accessories

Miscellaneous Supplies

  • 3/4" tape, wire, 1" circle punch

 

Plaid Button Box
 
 
 

Instructions

  1. Moisten a clean sponge and wipe bisque to remove any dust.
  2. Start in the center of the lid, between the holes, apply the the 3/4" tape to tape the entire lid. Place the tape neatly against each other.
  3. Remove every other piece of tape, leaving the center tape. Taping in this manner gives you even lines without measuring.
  4. Use the Soft Fan brush to apply 1 even coat of SC-76 Cara-bein Blue to the spaces between the tape.
  5. Remove the tape.
  6. Start in the center of the lid, between the holes, in the opposite direction of the stripes, apply the 3/4" inch tape to the entire lid. 
  7. Remove every other piece of tape.  
  8. Use the Soft Fan to apply 1 even coat of SC-76 Cara-bein Blue to the bisque areas.
  9. Remove the tape.
  10. Use the Soft Fan to apply 3 coats of SC-76 Cara bein Blue to the inside of the box base. Apply 3 coats of SC-35 Gray Hare to the outside.
  11. Punch out 11 x 25mm circles You will be using the negative space of the punch.  Wet with water, place over the Gray Hare in a row. Use the CB-106 #6 Script Liner to brush over the punched circle with two coats of SC-76 Cara-bein Blue.
  12. Remove the paper template.
  13. Brush the area around the button holes with SC-74 Hot Tamale.
  14. Dip into Clear Glaze.
  15. Fire to Cone 06.
  16. Use coloured craft wire to thread into the button holes, it will create a handle.