Designer Liner Flower Plate

Products Used

Bisque

• SB-104 Rimmed Salad Plate

Colour

• SC-11 Blue Yonder
• SC-27 Sour Apple
• SW-002 Matte Clear
• SW-206 Melon
• SW-209 Charcoal
• SW-303 Manganese Wash
• SG-401 Black 

Decorating Accessories

• BT-910 Synthetic Sponge
• CB-106 #6 Script Liner
• CB-604 #4 Soft Fan

 

 

Designer: Nathan Klein    

Instructions

Begin with properly fired shelf cone 04 bisque. Moisten a clean sponge and wipe bisque to remove any dust.

 

Using SG-401 Black Designer Liner, sketch out the flower design on plate by starting with the center of each flower and adding petals.

 

Using CB-106 #6 Script Liner, apply 2 coats of SC-27 Sour Apple to various petals.

 

Using CB-106 #6 Script Liner, apply 2 coats of SC-11 Blue Yonder to various petals.

 

Using CB-106 #6 Script Liner, apply 2 coats of SW-002 Matte Clear to various flowers. Note: SW-002 Matte Clear can be applied over the Stoke & Coat on the various petals.

 

Using CB-106 #6 Script Liner, apply 2 coats of SW-206 Melon to various flowers. Note: SW-206 Melon can be applied over the Stoke & Coat on the various petals.

 

Using CB-106 #6 Script Liner, apply 1 coat of SW-303 Manganese Wash to the rim of SB-104 Rimmed Salad Plate.

 

Using CB-604 #4 Soft Fan, apply 3 coats of SW-209 Charcoal to the background and the back of the plate. Take care to not get any SW-209 Charcoal on the flowers.

 

Wipe off any excess glaze from the foot of the plate with a damp sponge.

 

Do not stilt or hang over the edge of the kiln shelf.

 

Fire to cone 5/6.