Tulip Plate

  Products Used

Bisque

• SB-104 Rimmed Salad Plate

Colour

• SC-16 Cotton Tail
• SC-24 Dandelion
• SC-31 THe Blues
• SC-32 Blue Beard
• SC-52 Toad-ily Green
• SC-74 Hot Tamale
• SC-75 Orange-A-Peel
• SW-101 Stoneware Clear
• SW-105 Frost Blue
• SW-119 Cinnabar
• SG-401 Designer Liner

Decorating Accessories

• CB-106 #6 Script Liner
• CB-604 #4 Soft Fan
• BT-910 Synthetic Sponges
• AC-230 Clay Carbon Paper

    Additional Materials

• Pencil
• Download Project Pattern: Stoneware Tulip

  Project Info

• Designer: Marcia Roullard
• Skill Level: Basic
• Time: 2 hours

 

Instructions

Begin with properly fired shelf cone 04 bisque.  Moisten a clean sponge and wipe bisque to remove any dust.

 

With a pencil and AC-230 Clay Carbon Paper Trace on a design of choice.

 

Outline the design with SG-401 Designer Liner.

 

Using a CB-106 Script Liner, apply 2-3 coats of SC-52 Toad-ily Green to the leaves and stem.

 

Using a CB-106 #6 Script Liner, brush the teardrop shaped flower heads starting at the bottom of the shape with SC-74 Hot Tamale then add SC-75 Orange-A-Peel to the brush gradating in the middle, then use SC-24 Dandelion at the top, use some SC-16 Cotton Tail at the very top. Apply 2 coats.

 

Using a CB-106 #6 Script Liner, brush the long stems at the top of the flowers with 2 coats of SC-16 Cotton Tail.

 

Float 1 coat of SC-32 Bluebeard on the background, using SC-31 The Blues at the bottom background of the plate.

 

Using a CB-106 #6 Script Liner, apply 2 coats of SW-119 Cinnabar to the outer rim of the plate.

 

Using a CB-106 Script Liner, apply 2 coats of SW-001 Stoneware Clear to the top of the plate

 

Using a CB-106 Script Liner, apply 3 coats of SW-105 Frost Blue to the back of the plate. Allow to dry.

 

With a damp sponge, wipe off any excess glaze off the foot of plate.

 

Place on a high-fired kiln washed kiln shelf.

 

Do Not Stilt and make sure the plate is not hanging over the kiln shelf.

 

Fire to shelf cone 5/6.