Pottery Painting Business Starter Kits

Pottery Painting Studio kit 24+ seats

£5,104.85Stock Available:  1

Pack updated April 2017 picture is different to what is included in the pack below

Price excluding VAT, includes delivery to Zone1 mainland UK

1 x Morgan Kiln with furniture kit
6 x Large Plate Stackers, 6 x Small plate Stackers, 12 x spacers
25 sets of witness cones for cone 06 firing, Selection of 51 stilts (suitable for cone06 firing) and a stilt stone.

10 each of 25 Stroke & Coat 59ml (SC6, SC8, SC9, SC11, SC14, SC15, SC16, SC18, SC20, SC24, SC25, SC26, SC27, SC28, SC33, SC35, SC40, SC45, SC054, SC70, SC74, SC75, SC76, SC85, SC89) and 1 each of the 25 473ml of Mayco Stroke & Coat colours

Selection of bisque: 48 Mugs HBT7004, 24 latte Mugs HBT8087, 24 Beakers HBT8084, 36 Cereal Bowls HBT7013, 16 Bowls HBT7012, 96 Rimmed 20cm Plates HBT7001, 36 Rimmed 27cm plates HBT3706, 10 Rimmed 34.5cm platters HBT3929, 72 Coupe 21cm plates HBT7015, 12 Coupe 25cm plates HBT8098, 6 1 litre jugs HBT8080, 18 vases MB0885 & CX5003, 124 tiles MHE20 & MHE21, 30 Hanging ornaments CKD4 & CKD15, 12 Frames MB0994 & CX5074, 6 Teapots HBT7016,12 Milk jugs HBT8095, 12 Heart Dish HBT512, 12 Owl Plates, A selection of Banks,

1 x 5 gallon Unleaded Clear Dipping Glaze, RB140 Glaze Fan
1 x Viscosity Testing Cup, 1 x Dipping Tongs.

Good selction of brushes (F03004 x10, F03008 x10, F39210 x10, F39212 x10, F50002 x 10, F60802 x10, F61402 x10)
 8 x Writer bottles AC219 & AC222, Banding Wheel with armrest, Large sumi brush
 20 x sponges, 20 x Sponges on Sticks, 6 x Sanding pad, 1 x Pallet Knife, 4 packs of Clay Carbon, 1 pack of newsprint table protectors.
  25kg block of white earthenware Clay, FC5053 Clay Cutter

If this pack is delivered to you, it will be packed on a pallet. Our carrier is instructed to deliver to the most accesible point by hand pump truck. The kiln is packed in a crate which you need a claw hammer or crowbar to open. The kiln stand is flat packed in one of the uprights of the crate. The kiln without the furniture kit weighs 190kg. It has 4 handles on the sides enabaling the kiln to be lifted into position by up to 4 people.  The kiln can also be dismantled if required to get through doorways, see video on kiln page. The kiln requires 50amp supply to be installed by an electrican, further information on the kiln can be found on this website under kilns