Sunrise XL Handheld Clay Extruder

The R201 Sunrise XL Handheld Clay Extruder from DiamondCore® Tools has an angled, stainless-steel blade that leaves clean edges and pulls through clay effortlessly to create a larger handle shape that has a rounded rise in the middle.

DESCRIPTION: 

• Slices through a slab to make a handle with a rounded rise in the middle
• Angled, stainless-steel blade leaves clean edges and pulls through clay effortlessly
• 4 3/8-inch (11 cm)-long hardwood handle
• Great for feet, handles, and more 
• Adjustable-depth ski controls the thickness of the cut
• Thumb screw allows for easy ski adjustment
• Max approx. blade width 29 mm X height 19 mm
• Min approx. blade width 28 mm X height 10 mm
• Wood grain may vary

USES/BENEFITS:

• Ideal for hand-builders and useful for throwers
• Consistent shape and adjustable thickness
• So easy to use; avoid all that pulling
• Works on a variety of clay types
• Always-sharp stainless-steel blade won’t rust or shatter
• A variety of basic and intricate shapes are available

CAUTIONS:

• Not designed to be used with extremely wet or sticky clay
• Use all safety precautions
• Keep out of the reach of children 

TIP:

For best results, use these foot and handle-making tools when the clay is not extremely wet or sticky. The clay tool blade should be clean and dry. Ideally, pull the extrusion up and out as it is being formed or fold back the sides of the slab so the extrusion pops up and out.