Top ^
Shelfelf24
  1. How to - Pottery Tips »
  2. Hallowe'en Projects »
  3. Haunted House Plate

Haunted House Plate

haunted house

 

Bisque

  • MB-1435 House Plate

Colour

  • FN-009 Black
  • SC-13 Grapel
  • SC-15 Tuxedo
  • SC-27 Sour Apple
  • SC-29 Bluegrass
  • SC-35 Gray Hare
  • SC-36 Irish Luck
  • SC-60 Silver Lining
  • SC-77 Glo Worm

Decorating Accessories

  • CB-604 #4 Soft Fan
  • CB-106 #6 Script Liner
  • CB-110 #10/0 Mini Liner
  • CB-202 #2 Detail Liner
  • DSS-118 Halloween
  • CLC1 Clay Carbon
  • AC-310 Silkscreen Medium

Miscellaneous Accessories 

 

 

Instructions

  1. Begin with properly fired bisque.
  2. Moisten a clean sponge and wipe bisque to remove any dust.
  3. Using a CB-604 #4 Soft Fan, apply 1 coat of SC-35 Gray Hare to the top if the plate. When applying the 2nd coat of SC-35 Gray Hare, load 1/2 the brush with SC-29 Bluegrass and apply in a cross hatch pattern. Repeat the previous step, but use SC-27 Sour Apple and SC-60 Silver Lining for a grand total of 3 coats.
  4. Using a CB-106 #6 Script Liner, apply 3 coats of SC-77 Glo Worm to the windows and door and SC-13 Grapel to the chimney.
  5. Using the same brush, apply 2 coats of SC-29 Bluegrass to the roof and SC-36 Irish Luck to the grass. Using a CB-202 #2 Detail Liner, apply 3 coats of SC-13 Grapel to the trim around the windows and door.
  6. Using CLC1 Clay Carbon Paper, transfer the design onto the plate.
  7. Place SC-15 Tuxedo on a palette or tile and sprinkle with AC-310 Silkscreen Medium.
  8. Using a palette knife mix colour and medium to the consistency of thick peanut butter. If the mix is too thin, add more AC-310 Silkscreen Medium, or if it is too thick add more Stroke & Coat. Too thin of a mixture will bleed under the screen and give you a blurred image. Too thick of a mixture will make it hard for the product to penetrate through the holes in the screen and give blank areas in your screen.  Watch our 'how to use silkscreens' video : https://www.youtube.com/watch?v=7UneWAULQ-s
  9. Use the spider web screen from DSS-118 Halloween and apply the screen in the circle windows.
  10. Using a CB-110 #10/0 Mini Liner, outline the details with 1 coat of SC-15 Tuxedo and fill in the monster and fence.
  11. Using a CB-106 #6 Script Liner, apply 2 coats of SC-29 Bluegrass to the monster's shadow.
  12. Using a CB-604 #4 Soft Fan, apply 3 coats of FN-009 Black to the back of the plate.
  13. Let dry completely.
  14. Stilt and fire to shelf cone 06/05.