Shelfelf24

Cone Art Round 1822

GX1822D
£  (temporarily out of stock)Stock Available:  0
Request email notification when this product is back in stock...
required
required

93 Litre Top loading electric Pottery kiln.

 

 

A very popular sized kiln which will suit both a keen hobbyist or a new small ceramic business.  If you are looking for your first kiln and unsure which to chose, you will not regret getting this model.  It is compact enough to run easily from a standard domestic electric supply on a 30amp supply and support an aspiring new potter with a chamber spacious enough to take work up to 55cm tall and 40cm wide.  As well as supporting a new small business in the PYO Pottery industry, with multiple shelves included you could accomodate up to 39 mugs per firing.

With the extra insulation outside the chamber, all fired efficiently and up to 1300c if you need!

 

This top loader comes with all the standard features that set the "Cone Art" brand apart: heavy duty floor element, double wall design, patented lid lifter system, multi zone control, and over sized swing out control panel.

 

Two thermocouples report temperatures from different areas of the chamber, ensuring the most extreme control over balanced temperatures throughout the kiln during each firing.

A double wall construction results in energy efficiency, and the added element in the floor provides extra assurance for even firings every time.

A perfectly sized kiln made for the new generation of studio owner, easy to install, load, control, monitor and maintain.  Combining a patented lid lifter with dynamic heat control, achieving consistent firings every time.

 

  •     93 litres
  •     Double wall insulated construction
  •     High Specification Kanthal A-1 heating Elements
  •     Multi zone Bartlett controller
  •     Lid safety electric cut-out as standard
  •     Kiln shelves and props
  •     2 year limited warranty


This is a double insulated kiln with a wall profile of 2.5” premium firebrick plus 1″ of block insulation. 

The floor and lid are constructed with 3″ firebrick and has an additional 1″ of block insulation.  The extra insulation ensures a cooler, safer jacket, longer element life, and approximately 30 % savings in electricity costs. The kiln is clad in a stainless-steel jacket for extra protection and durability.

There are heavy-duty Kanthal A-1 elements in the walls and floor. This makes firing to cone 10 possible.

This kiln is equipped with a counterweight lid lifter and advanced Wifi-enabled Genesis touch screen 'Bartlett' controller with multiple zone control panel mounted on an angle for easy viewing.

Included with this kiln is a full Official Furniture kit which contains the following:

  • 3 x Round 15.5 inch full shelves
  • 1 x Round 15.5 inch half shelf
  • 4 x 1 inch posts
  • 3 x 2 inch posts
  • 3 x 4 inch posts
  • 3 x 6 inch posts
  • 2 kilos of Kilnwash
Max temp: 1300Volume: 93 litres (3.3 cubic foot)Depth: 57cm (22.5 inches)Opening: 45cm (17.5 inches)Outer dimensions: 65cm wide x 88cm tall (lid closed) 147cm tall (lid open) x 89cm front to backShipping weight: 130 KGAmperes: 28Phase: 1Watts: 6700Volts: