Christmas Tree
Instructions
Tree #1
-
Begin with BI2034 bisque. Moisten a sponge and wipe bisque to remove any dust.
-
Pour about 2 TBS of EL-134 Mirror Blue onto the palette. Thin with water. Using the Soft Fan, apply 1 coat over the tree and base. Take a damp sponge and wipe most of the glaze off. It should only be left in the recessed areas.
-
Using the Soft Fan with EL-149 Lavender Flower, apply 3 coats to the tree and base. Allow glaze to dry between coats.
-
Using the Soft Fan with EL-101 Oyster Shell, apply 1 plop coat over the tips of the branches.
-
Fire to cone 06.
-
Attach the pinch light to the base. Put the tree on the base.
-
Place the blue lights on the tree.
-
Place the clear star on top.
-
Plug the tree into an outlet and turn on.
Tree #2
-
Moisten a sponge and wipe bisque to remove any dust.
-
Using the Soft Fan with EL-123 Patina, apply 3 coats to the top 2/3 of the tree. Allow glaze to dry between coats.
-
Using the Soft Fan with EL-122 Malachite, apply 2 coats to the bottom 2/3 of the tree. Allow glaze to dry between coats. Be sure to randomly brush the edge of the last coat so that it’s not a straight line across the tree. Use long, vertical strokes.
-
Using the Soft Fan with EL-122 Malachite, apply 2 coats to the outside of the base. Allow glaze to dry between coats.
-
Fire to cone 06.
-
Attach the pinch light to the base. Put the tree on the base.
-
Place the green lights on the bottom half of the tree. Place the teal lights on the top half of the tree.
-
Place the clear star on top.
-
Plug the tree into an outlet and turn on.
Tree #3
-
Moisten a sponge and wipe bisque to remove any dust.
-
Using the Soft Fan with EL-137 Black Aventurine, apply 3 coats to the tree and base. Allow glaze to dry between coats.
-
Fire to cone 06.
-
Attach the pinch light to the base. Put the tree on the base.
-
Place the lights randomly on the tree.
-
Place the yellow or clear star on top.
-
Plug the tree into an outlet and turn on.
Tree #4
-
Moisten a sponge and wipe bisque to remove any dust.
-
Using the Soft Fan with EL-213 Painted Desert, apply 2 coats to the tree and base. Allow glaze to dry between coats.
-
Using the Soft Fan with EL-212 Spotted Walnut, apply 2
-
Using the Soft Fan with EL-122 Malachite, apply 2 coats to the tree and base. Allow glaze to dry between coats.
-
Fire to cone 06.
-
Attach the pinch light to the base. Put the tree on the base.
-
Place the clear and yellow lights randomly on the tree.
-
Place the yellow or clear star on top.
-
Plug the tree into an outlet and turn on.